Fixing Socket with Bent End

Fixing Socket with Bent End

Lifting and Fixing Tools

DSI Artéon - Fixing socket with bent end
ReferenceThread x LE
[mm]
B
[mm]
F
[daN]
636008035P90EZM8 x 351525180
636008045P90EZM8 x 451525230
636010040P90EZM10 x 401525240
636010060P90EZM10 x 603025400
636012045P90EZM12 x 452525350
636012070P90EZM12 x 704025600
636016060P90EZM16 x 602535600
636016100P90EZM16 x 10045351000
636020070P90EZM20 x 7030351000
636020100P90EZM20 x 10045351250
DSI Artéon - Fixing socket with bent end
ReferenceThread x LCN
[mm]
CV
[mm]
S
[daN]
H
[mm]
636008035P90EZM8 x 35557010560
636008045P90EZM8 x 45709013570
636010040P90EZM10 x 40608012065
636108060P90EZM10 x 609012018085
636012045P90EZM12 x 45709013570
636012070P90EZM12 x 7010514021095
636016060P90EZM16 x 609012018085
636016100P90EZM16 x 100150200300125
636020070P90EZM20 x 7010514021095
636020100P90EZM20 x 100150200300125

Fixing sockets with bent end are self-anchoring sockets.

Fixing sockets must not be used for lifting but exclusively for fixing. Fixing sockets are electro-galvanised bichromated.

Permissible loads F are defined for concrete compressive strength of 25 MPa. To avoid premature failure of the socket by blow-out of the concrete, the socket has to be placed with minimum distances, from the edge and between sockets.

For straight pulling N, the minimum edge distance is CN and the minimum distance between 2 sockets is S. For shear force V, the minimum edge distance is CV and the minimum distance between 2 sockets is S. The minimum thickness of the panel should be H (minimum concrete cover of 25 mm). When the force is a combination of shear force V and straight pull N, the permissible load F should respect the following formula:

√(V2+N2) ≤ perm. F

Fixing sockets must be used with metric thread screw. They must be screwed on at least one time the diameter and no more than E.

DSI Image Trailer

DYWIDAG-Systems International Pty. Ltd. APAC/ASEAN

use our contact form
send us an e-mail
or call us:
+61-2 49 48 90 99